-
What are the advantages and disadvantages of different types of high-voltage fuses in practical applications?
1. High voltage AC fuseadvantage:It has simple structure, small size, cheap price and easy maintenance.When the current exceeds a given value for a certain period of time, the specially designed fuse
2024-12-09 shurong
-
Calculation formula of fuse
The fuse calculation formula can vary based on different circuit parameters and fuse specifications. The following are two common calculation formulas:Select the rated current of the fuse based on the
2024-12-09 shurong
-
Medium voltage current limiting fuse
Medium voltage current limiting fuse is a protective device used in medium voltage power systems. Here is a detailed introduction about it:Working Principle:Thermal effect of current: The medium volta
2024-09-25 shurong
-
What should we pay attention to in the daily maintenance and inspection of high-voltage fuses?
Routine maintenance and repair of high-voltage fuses are crucial. The following are the aspects that need attention:1. Daily maintenance1.Appearance inspectionRegularly check the appearance of the hig
2024-09-18 shurong
-
Field Situation and Analysis of Capacitor Cabinet Explosion Accident in Substation
1. On-site phenomenon:
1. There is a car wash outside the wall of the power station, and there is a lot of water vapor. There are fan holes on the wall of the power station that communicate with the car wash (but the wind is blown out from the substation).2024-09-11 shurong
-
What is a fuse?
Fuse refers to an electrical appliance that fuses the fuse with the heat generated by itself and disconnects the circuit when the current exceeds the specified value. The fuse is based on the fact that after the current exceeds the specified value for a period of time, the heat generated by itself melts the melt, thereby disconnecting the circuit; a current protector made by using this principle. Fuses are widely used in high and low voltage power distribution systems and control systems, as well as electrical equipment. As short circuit and overcurrent protectors, fuses are one of the most commonly used protection devices.
2024-09-11 shurong
-
What is the purity of the industrial silver in fuses?
Chinese Standard X Silver is commonly used in the chemical industry
2024-09-11 shurong
-
The difference between high voltage fuse XRNT and XRNP
XRNT is generally used to protect transformers, and XRNP is generally used to protect transformers. XRNT’s fusion tubes have relatively large currents, and XRNP’s have small currents such as 0.5A or 1A. The commonly used specifications are different. The size of the fusion tube is also different , The matching seat is also different, the XRNT one is bigger. The fuse tube of XRNP is relatively small.
2024-09-11 shurong